Summary: Fully capable to set up and operate any CNC Vertical Machining Center machine in the department.  Will be capable of programming any part in department.  Other duties may be assigned.

Reads process sheets, job folders, blueprints, and work instructions of part to determine machining to be done, dimensional specifications, set up, and operating requirements.

Maintain job folder integrity. 

Repair/adjust set-ups and tooling, troubleshoot nonconforming processes.

Selects and installs preset tooling in machine in sequence specified on process sheet.

Observes numerical displays on control panel and compares with data on process sheet to verify dimensional adjustments, feed rates, and speeds of machining cuts.

Inspects first run piece and spot checks succeeding pieces for conformance to specifications.

Studies job packet and organizes materials for next run.

Sets up and operates another machine. 

Supervisory Responsibilities

This job has no supervisory responsibilities.

Competencies

To perform the job successfully, an individual should demonstrate the following competencies:

Analytical - Uses intuition and experience to complement data.

Design - Generates creative solutions; Demonstrates attention to detail.

Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics.

Technical Skills - Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others.

Customer Service - Meets commitments.

Interpersonal Skills - Focuses on solving conflict, not blaming; Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things.

Oral Communication - Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; Responds well to questions; Participates in meetings.

Written Communication - Writes clearly and informatively; Able to read and interpret written information.

Teamwork - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Supports everyone's efforts to succeed.

Change Management - Develops workable implementation plans; Communicates changes effectively.

Managing People - Makes self available to staff; Develops subordinates' skills and encourages growth; Fosters quality focus in others; Improves processes, products and services.

Quality Management - Looks for ways to improve and promote quality; Demonstrates accuracy and thoroughness.

Cost Consciousness - Contributes to profits and revenue; Conserves organizational resources.

Diversity - Shows respect and sensitivity for cultural differences; promotes a harassment-free environment.

Ethics - Treats people with respect; Keeps commitments; inspires the trust of others; Works with integrity and ethically; Upholds organizational values.

Organizational Support - Follows policies and procedures; Completes administrative tasks correctly and on time; supports organization's goals and values; Supports affirmative action and respects diversity.

Judgment - Displays willingness to make decisions; Exhibits sound and accurate judgment; Supports and explains reasoning for decisions; Includes appropriate people in decision-making process; Makes timely decisions.

Motivation - Demonstrates persistence and overcomes obstacles; Measures self against standard of excellence.

Planning/Organizing - Uses time efficiently.

Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments.

Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality.

Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly.

Safety and Security - Observes safety and security procedures; Reports potentially unsafe conditions; Uses equipment and materials properly.

Adaptability - Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events.

Attendance/Punctuality - Is consistently at work and on time; Arrives at meetings and appointments on time.

Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals. Completes tasks on time or notifies appropriate person with an alternate plan.

Initiative - Volunteers readily; Seeks increased responsibilities; Looks for and takes advantage of opportunities; Asks for and offers help when needed.

Innovation - Displays original thinking and creativity; Meets challenges with resourcefulness; Generates suggestions for improving work; Presents ideas and information in a manner that gets others' attention.

Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education and/or Experience

Seven to ten years related experience and/or training; or equivalent combination of education and experience.

Language Skills

Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.  Ability to speak effectively before groups of employees of the organization.

Mathematical Skills

Ability to apply concepts of advanced algebra, trigonometry and geometry.

Reasoning Ability

Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.  Ability to deal with problems involving several concrete variables in standardized situations.

Computer Skills

To perform this job successfully, an individual should have knowledge of Internet software; manufacturing software, machine programming and Word processing software.

Other Skills and Abilities

Advanced blue print reading.  Ability to set-up and operate all machines in department.  Upper level skill set to program and make machine adjustments.  Must possess a high level of gauging and inspection knowledge.  Competent to give first and last piece inspection.  Experienced with Fanuc, Haas and Okuma OSP controls.  Good understanding of Geometric Tolerance.  Must understand G and M codes.  Operate two machines at a time.  Proficient in problem solving. 

Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this Job, the employee is regularly required to stand; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to walk; climb or balance and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 25 pounds.  Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.

Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.

The employee is expected to adhere to all company policies.

NOTE: This job description is not intended to be all-inclusive. Employee may perform other duties assigned to meet the ongoing needs of the organization.

Equal Employment Opportunity